 |
Safety Information This device meets the following EU-Directives: EN 55014-1:1993/A1:1997 EN 55014-2 :1997 Use only with 220 –240 VAC 50/60 Hz input powerter delivery. Never pull the power converter out of the household power socket on its cable. Do not use this device if: USE 1. Push the power switch (C) to (1) for treatment of the eyelids or (2) for all other applications and wait about 1 Minute. 2. Apply an amount of ca. 1 – 2 ml of your favour skin cream, gel, lotion or water on the vibration generator head (E). 3. Move the device in circles on the skin as shown in the
illustrations. 4. Move the device slowly over the skin, you can stay up to 10 seconds on the same position Important is, that you have permanent contact with the skin, but don´t put pressure on it. 5. Finish the treatment after maximum 10 minutes in the same area of the body. You can treat different body regions, each for 10 minutes. Wait at least 10 hours before repeated treatment of the same area. If several different individuals are using the BeautyLifter, wait 5 minutes between each treatment session, to cool down the vibration generator head. 6. When stop using, please push the bottom to O (off), and pull the converter out of the socket. 7. Clean the body housing (B) and the vibration generator head (E)
with a dry and soft rag. Do not clean with water, due to the occurrence
of short circuit or leakage. 9. As long as feeling uncomfortable during treatment, stop using and consult your physician.
|
